Riverstone

Brazos BG	Canadian GR	Fuerte NE	Pecos BI
Rio Bravo MT	Rio Grande VE	Yampa GI

Riverstone GI Mosaic (2x2 Square)	Riverstone NE Mosaic (2x2 Square)	Riverstone Green Border	Riverstone Green Corner Insert
Riverstone Red Border	Riverstone Red Corner Insert

Stone BG Bullnose	Stone BI Bullnose	Stone GI Bullnose	Stone GR Bullnose
Stone MT Bullnose	Stone NE Bullnose	Stone VE Bullnose	Stone BG V-Cap
Stone BI V-Cap	Stone GI V-Cap	Stone GR V-Cap	Stone MT V-Cap
Stone NE V-Cap	Stone VE V-Cap

Floor Tile

Tile meets all criteria for use on floors; however, it may also be used on vertical applications such as walls, countertops and fireplace surrounds. See Abrasion Resistance, Coefficient of Friction and Frost Resistance for installation-specific details.

Wall Tile

Tile meets all criteria for use on vertical applications such as walls, backsplashes and fireplace surrounds. See Abrasion Resistance and Frost Resistance for installation-specific details.

Moderate Variation V3

While the colors and/or texture present on a single piece of tile will be indicative of the color and/or texture to be expected on the other tiles, the amount of color and/or texture on each piece may vary significantly. It is recommended that the entire range be viewed before selection.

21% Recycled Content

Minimum Pre-Consumer Recycled Content

No VOCs

Volatile organic compounds (VOCs) are emitted as gases from certain solids or liquids; they include a variety of chemicals, some of which may have short- and long-term adverse health effects. This series is free of VOC emissions.

0.6 C.O.F Wet

≥ 0.6 Meets ADA recommendation for slip resistant accessible routes (0.8 recommended for ramps)

0.7 C.O.F Dry

≥ 0.7 Higher level of slip resistance for special situations

Meets ADA Recommendations

The Americans with Disabilities Act (ADA) recommends a minimum static coefficient of friction of 0.60 (wet and dry) for accessible routes and 0.80 (wet and dry) for ramps.

Decorative Accent

Specialty tiles designed to enhance floor and wall tile when used as inserts, borders and special accents.

Frost Resistant

Industry criteria dictate that tile shall not exceed 5% water absorption to be recognized as frost resistant. To be recognized as Porcelain tile, the water absorption rate cannot exceed 0.50% (impervious). Wall tile must not exceed 20% water absorption and is not frost resistant.

Abrasion Resistance 4

Class IV - Tile in this class may withstand heavier amounts of traffic with greater amounts of dirt and/or other abrasives present including commercial kitchens and areas with regular traffic from the outside. See Coefficient of Friction and Frost Resistance for installation-specific details.

Modular Tile

Smaller sized tiles feature standardized units or dimensions and can be installed individually or in conjunction Tile with Field Tile or Wall Tile to create more elaborate, custom patterns.

Suitable for Outdoors

The combination of Frost Resistance and Coefficient of Friction results for this series makes it appropriate for exterior horizontal (flat) surfaces. See ADA criteria for ramps.

Trim Available

Various complementary pieces designed to finish edges of field tile.

Contributes to LEED Credits

Incorporation of recycled material during manufacture may contribute to LEED credits for Recycled Materials.

Glazed Porcelain Tile

For the Homeowner

FOR THE PROFESSIONAL

WHO IS RAGNO

WHY CHOOSE TILE

ENVIRONMENT

WHERE TO BUY

Share on