Harbour Rock

Bombay BG	Bombay BG	Boston GR	Boston GR
Sydney NO	Sydney NO

Palace Insert

Palace Corner

Palace Border

Bombay BG Bullnose	Boston GR Bullnose	Sydney NO Bullnose	Bombay BG V-Cap
Boston GR V-Cap	Sydney NO V-Cap	Bombay BG V-Cap Corner	Boston GR V-Cap Corner
Sydney NO V-Cap Corner	Bombay BG Bead	Boston GR Bead	Sydney NO Bead
Bombay BG Beak	Boston GR Beak	Sydney NO Beak

Floor Tile

Tile meets all criteria for use on floors; however, it may also be used on vertical applications such as walls, countertops and fireplace surrounds. See Abrasion Resistance, Coefficient of Friction and Frost Resistance for installation-specific details.

Wall Tile

Tile meets all criteria for use on vertical applications such as walls, backsplashes and fireplace surrounds. See Abrasion Resistance and Frost Resistance for installation-specific details.

Slight Variation V2

Clearly distinguishable differences in texture and/or pattern within similar colors.

7% Recycled Content

7% Minimum Pre-Consumer Recycled Content

No VOCs

Volatile organic compounds (VOCs) are emitted as gases from certain solids or liquids; they include a variety of chemicals, some of which may have short- and long-term adverse health effects. This series is free of VOC emissions.

0.6 C.O.F Wet

≥ 0.6 Meets ADA recommendation for slip resistant accessible routes (0.8 recommended for ramps)

0.7 C.O.F Dry

≥ 0.7 Higher level of slip resistance for special situations

Meets ADA Recommendations

The Americans with Disabilities Act (ADA) recommends a minimum static coefficient of friction of 0.60 (wet and dry) for accessible routes and 0.80 (wet and dry) for ramps.

Decorative Accent

Specialty tiles designed to enhance floor and wall tile when used as inserts, borders and special accents.

Frost Resistant

Industry criteria dictate that tile shall not exceed 5% water absorption to be recognized as frost resistant. To be recognized as Porcelain tile, the water absorption rate cannot exceed 0.50% (impervious). Wall tile must not exceed 20% water absorption and is not frost resistant.

Abrasion Resistance 4

Class IV - Tile in this class may withstand heavier amounts of traffic with greater amounts of dirt and/or other abrasives present including commercial kitchens and areas with regular traffic from the outside. See Coefficient of Friction and Frost Resistance for installation-specific details.

Modular Tile

Smaller sized tiles feature standardized units or dimensions and can be installed individually or in conjunction Tile with Field Tile or Wall Tile to create more elaborate, custom patterns.

Suitable for Outdoors

The combination of Frost Resistance and Coefficient of Friction results for this series makes it appropriate for exterior horizontal (flat) surfaces. See ADA criteria for ramps.

Trim Available

Various complementary pieces designed to finish edges of field tile.

Contributes to LEED Credits

Incorporation of recycled material during manufacture may contribute to LEED credits for Recycled Materials.

Glazed Porcelain Tile

For the Homeowner

FOR THE PROFESSIONAL

WHO IS RAGNO

WHY CHOOSE TILE

ENVIRONMENT

WHERE TO BUY